View Full Version : Hevi Metal Pattern Test
Bigslugger
08-27-2009, 04:05 PM
I finally got out to pattern the Hevi-Metal I bought from Game Fair
Load: 3" 1 1/4 oz #2 1500fps
Range: 30 yards
Gun: Browning Gold Fusion 12 gauge with factory Invector Plus Chokes
30" Circle
First Shot was with a Improved Cylinder
103 in and 20 out
http://i187.photobucket.com/albums/x315/bigslugger06/HPIM0601.jpg
Second Shot was with the Modified
147 in and 17 out
http://i187.photobucket.com/albums/x315/bigslugger06/HPIM0602.jpg
Third Shot was with the Improved Modified
136 in and 18 out
http://i187.photobucket.com/albums/x315/bigslugger06/HPIM0603.jpg
After market choke or not?
SBE II
08-27-2009, 04:09 PM
If your going to buy one or the other I would say buy a WW Swat....Those are pretty good numbers for a factory tube I would stick with those, I barely broke 100.....
zippy19
08-27-2009, 06:07 PM
Why would you not be impressed with the modified? I am not trying to steer you away from buying a choke but why spend the $ on something you haven't shot? How much better can you get?
Goose4280
08-27-2009, 06:22 PM
Id just use you Mod. or IC both had plenty dense of a pattern to kill. Save the money your going to spend on a choke tube and buy more ammo or a new call ;)
CUPPED & COMMITED
08-27-2009, 06:29 PM
How far was this shot from? I am interested in getting some of these for geese.
TeamWakEm
08-29-2009, 11:47 AM
I just patterned my hevi metal yesterday and let me tell you it is a huge difference. it totally blew everything else out of the water. i shot kent and winchester suprems. i would recomend shooting the hevi metal shot. everything i pattered was 3.5's #2 from 35 yds. maybe i can get some pics up later
freefall319
08-29-2009, 03:26 PM
Just ordered a case of 3 1/2's. Cant wait to get them in so i can try them out.
Goose4280
08-29-2009, 10:19 PM
Ive never shot the the hevi-metal. I had to read up on it a bit to see what it was all about. Just a heads up for you guys that are interested in it. The load is half iron and half tungston. The shot size marked on the box is the size of the steel shot. So for example a 3.5 inch 1 1/2 oz 2 shot is going to be half #2 iron and half # 4 or #5 shot of tungston. I knew it was a mixture but didnt know the exact details until reading this. Just a little bit of info for the guys that didnt know that.
Oaklane 3
08-30-2009, 05:02 PM
If thats the yardage that you feel most of your shots are going to be, your IC and Mod. both gave great patterns in my oppinion. I wouldn't waste the money on an aftermarket choke.
freefall319
08-30-2009, 07:35 PM
I agree. Those are some good patterns. The rest is up to you now.:D
Powered by vBulletin® Version 4.1.11 Copyright © 2012 vBulletin Solutions, Inc. All rights reserved.