Spinning wing decoys

[shootsa410]

I have three spinners and have remotes for all three. Does anyone know if I can or how to set the receivers up to work off one transmitter?

[h20fowler]

Easiest way would be to hard wire them all on one circuit. I'm not sure about changing frequencies within the receivers or transmitters. I'll see what I can come up with.

[Greg Ruark Jr.]

While I'm not versed in the remotes you have; I can tell you that with most remotes( transmitter and receiver) both will have a row of very small switches somewhere on them. Set the switches the same on the transmitter and on the receiver. This will allow you to run all three with one remote. Dipswitches are very small, but any good remote will have them to prevent interference from other remotes.

[shootsa410]

Thanks for your input, I'll check them out.

[Killer Miller]

I know Lucky Ducks run on 1 of 3 different frequencies. If they are all the same, one remote should control all of them.